BUL SAS II Tac Pro 4.25" G2

This BUL SAS II Tac Pro 4.25” G2 is a new and improved version of the original Tac. This version comes equipped with a 4.25” ramped, ported bull barrel. Bull barrels are entirely straight and they are incredibly strong. This makes this type of barrel considerably less susceptible to vibrations. The end of the barrel that’s located in the frame has a little ramp at the end, that ensures the 9 mm rounds are fed into the barrel seamlessly. This makes the BUL SAS II Tac Pro 4.25” G2 a very accurate pistol with a reliable cycle. Additionally, the barrel features no less than eight small ports on top. The slide contains two slots that fit over the eight ports. Those ports ensure a part of the gasses that enter the barrel upon firing a bullet are vented up, instead of solely exiting through the front of the barrel. This reduces recoil -since less gas gets out through the front of the barrel- and simultaneously pushes the barrel down. As a result, the BUL SAS II Tac Pro 4.25” G2 experiences less muzzle flip, allowing the shooter to keep the gun trained on-target.

Aiming with this firearm can be done with the front- and rear sight, which allow you to aim and shoot with accuracy. Located towards the rear of the slide, right in front of the rear sight, is a removable plate that can be replaced with an adapter plate for a red dot. The BUL SAS II Tac Pro 4.25” G2 is Optics-Ready and it features the BAO multi footprint system. This pistol comes with three adapter plates:
• RMR
• DPP
• Holosun K & RMSc

The slide is made of stainless steel and it features multiple diagonal grooves on both sides for added grip, which make it easier to rack the slide. This allows you to cycle the pistol smoothly and consistently. The grip is made of black polymer, with a rough texture on both sides for added grip. There’s a ribbed texture on both the front and back of the grip. You’ll also find the grip safety on the back of the grip, that ensures the shooter can’t pull the trigger unless the pistol is held correctly and firmly. Additionally, the pistol has a manually operable safety, which can be operated from both the left side and the right side of the frame. There’s a Weaver/Picatinny accessory rail on the bottom of the dust cover, which can be used to mount something like a lamp or a laser.

This BUL SAS II Tac Pro 4.25” G2 comes with no less than four magazines. Each magazine has a capacity of 20 rounds and they can easily be loaded into the pistol and taken out again. The aluminium magwell has two milled grooves on both sides that allow you to more easily grab onto the magazines and pull them out.

This BUL SAS II Tac Pro 4.25” G2 comes supplied with the following accessories:
• Guide rod takedown tool
• Bore brush kit
• Range bag