Mount Rome Decumanus M2 QD 30 mm High Weaver/Picatinny

This Rome Decumanus M2 30 mm High Weaver/Picatinny mount has a cantilever design. The mounting rings extend beyond the monobloc, which allows you to mount a scope no less than 40 mm further forward than would be the case with a standard mount. That 40 mm of extra space leaves more room for proper eye relief. The mount can easily be attached to the scope rail, thanks to the Quick Detach base.

The scope is firmly mounted with six screws per mounting ring, which provide an even pressure distribution. There are numbers on the mount which indicate in what order the screws should be tightened for the best results. The integrated spirit level located on the front of the monobloc is visible to the shooter at all times and it allows you to see if the mount is level at a glance. There’s a slot in between the mounting rings for a wedge, which you can use to then perfectly level the scope with the mount.

You’ll find multiple connections on top of the Rome Decumanus M2 30 mm High Weaver/Picatinny mount and on the left side of the monobloc that can be used to mount extra accessories. The mount is entirely made of impact-resistant, black anodized aluminium with an anti-reflective and wear-resistant finish.