Electronic Level Vector Optics with Dual-Indicator ACD System

This electronic level by Vector Optics is equipped with a dual-indicator ACD system. When mounted, the system displays the cant of the rifle with small LEDs.

Mounting the level is straightforward. The level itself has a Weaver/Picatinny mount, with which it can be attached to the rifle. An optional addition consists of a rubber ring, which features five LEDs just like the electronic level itself. This ring can be placed around the scope, making the LEDs easy to see. Subsequently, the ring can be attached to the level using the integrated USB-C cable.

After mounting, the device can be calibrated to ensure that the indication LEDs accurately display the cant of the rifle. They display whether the rifle is canted towards the left or right and at what angle. The sensitivity can also be adjusted in five separate settings. Using these sensitivity settings, the most precise setting displays a cant of just 0.1°, while the least sensitive setting only displays a cant of over 3°. As a result, the electronic level offers a wide variety of ranges between which the cant is displayed. This can be useful at different firing distances. The lights themselves have three brightness settings, allowing them to be adjusted to the light conditions.

In order to save battery, the Vector Optics electronic level with dual-indicator ACD system switches off automatically after ten minutes of inactivity. If movement or vibration is detected within ten minutes, the timer is reset.

Vector Optics electronic level with dual-indicator ACD system features:

• Rubber indication ring
  • 45 cm integrated USB-C cable
  • Ring diameter: 44 mm
• Straightforward calibration
• Automatic shutoff after 10 minutes of inactivity
• 5 sensitivity settings
• 3 brightness settings
• IP65: weather-resistant
• Rechargeable with USB-C (fast charging)