Torque Wrench Set Wheeler FAT Professional 100 Piece

This Wheeler FAT Professional 100 piece torque wrench set consists of a hard case that adequately protects its contents. The set features one regular screwdriver and one torque wrench with a large amount of bits, which can be used to adjust various screws and nuts. Everything is neatly sorted in the hard case and there’s even a convenient overview on the inside of the lid, that covers all included bits.

You can use the Wheeler FAT torque wrench along with a bit to tighten every screw with a predetermined torque. Using the torque wrench significantly reduces the odds of issues that stem from under- or overtightening a screw. This torque wrench has a display on the side that you can use to gauge the set torque. You can adjust the torque by using the knob on the bottom of the torque wrench. That torque can be adjusted from 10 to 65 inch/pounds (1.13 Nm to 7.34 Nm).

Both the screwdriver and the torque wrench consist of a rubber grip that feels comfortable to hold in your hand and that allows you to exert quite a lot of force, with a steel, magnetised shaft on the front end. Because it is magnetised, all bits you insert into the shaft are kept in place firmly. Both the shaft and the bits are made of S2 tool steel that has a black phosphate coating for improved corrosion-resistance. That coating improves the tool life of the Wheeler FAT Professional 100 piece torque wrench set considerably, so you’ll be able to use it for a long time.

The torque wrench set by Wheeler contains the following bits:
• Flat blade bit: #1-#6, #8, #13-#16, #18-#21, #27-#30, #32-#35, #36, #39, #41, #45, #47
• Sae Hex bit (inch): .05, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, ¼, 5/16, 3/8
• Metric Hex bit (mm): 1.5, 2, 2.5, 3, 3.5, 4, 5, 5.5, 6, 7, 8, 9, 10
• Torx bit: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T35, T40
• Phillips bit: PH0, PH1, PH2, PH3, PH2 (long)
• Square bit: 1, 2, 3
• Pin bit (inch): 0.062, 0.093, 0.118, 0.125
• Metric nut driver (mm): 5, 5.5, 6, 7, 8, 10, 12
• Sae nut driver (inch): 3/16, ¼, 9/32, 5/16, 11/32, 3/8, 7/16, ½
• Leupold/Buehler, Hex adapter ¼ drive